1. <dd id="fockj"><center id="fockj"></center></dd>

      <progress id="fockj"><track id="fockj"><video id="fockj"></video></track></progress>
      1. <dd id="fockj"><pre id="fockj"></pre></dd>
        <dd id="fockj"></dd>
      2. <th id="fockj"><pre id="fockj"><rt id="fockj"></rt></pre></th>

        <dd id="fockj"></dd>
        <em id="fockj"></em>
        <em id="fockj"></em>
      3. <rp id="fockj"></rp>

        <button id="fockj"><acronym id="fockj"></acronym></button>
      4. <th id="fockj"></th>

          知道這些TCM維修代碼,助你故障快速修復

          叉車百科廈門電動叉車2021-06-07 08:18打印
            在電動叉車維修中,維修師傅經常會通過代碼判斷定位叉車的故障,快速的幫客戶處理好叉車問題。小編整理以下TCM電動叉車代碼提供大家使用:
          A1:CONTACTOR-MAIN
          B10: FUSE-MAIN
          B11: IGBT-TRAVEL
          B12: SENSOR-CURRENT TRAVEL >電流傳感器U相V相
          B13: DIRECTIONAL
          B14: ACCELERATOR
          C21: IGBT-HYD
          C22: SENSOR-CURRENT HYD >電流傳感器U相V相
          C23: SWITCH-LIFT
          C24: POTENTIO-MAST >傾斜水平或提升電位計出錯
          D30: FUSE-EPS>加速輸入減至1/2
          D31: SENSOR-EPS TOROUE >EPS扭矩傳感器加速輸入減至1/2
          D32: TR-EPS MAIN >加速輸入減至1/2
          E40: TR-AOS >電流閥出錯
          E41: POTENTIO-HYD LEVER >AOS控制電位計出錯
          E42: ENODER-HYD MAST >提升高度編碼器
          F51: *FAIL CURRENT-TRAVER* >行駛馬達電流
          F52: *FAIL CURRENT-HYD* >HYD MONTOR CURRENT
          F53: *FAIL VOLTAGE-TRAVEL*
          F54: *FAIL VOLTAGE-HYD*
          F55: *REDUC DUTY-OPERATION* >PCB OR IGBT TEMP
          XXX: *FAIL BUS SYSTEM* >DIPLAY TRANS
          WOO: *FAIL OPERATION* >行駛/液壓跳閘
          W01: *TURN OFF DY SWITCH* >行駛/液壓嚴重錯誤
          W02: *RELEASE PARKING BRAKE* >
          W03: *REPLENISH REFINED WATER FOR BATTERY* >電瓶補水
          W04: *REFILL BRAKE OIL*
          W05: *REDUCE THE LOAD*
          W06: *REFILL HYDRAULIC OIL*
          W07: *CHARGE THE BATTERY*
          W08: *RELEASE ACCEL TO NEUTRAL*
          W09: *OFF HYD LEVER TO NEUTRAL*
          W10: *AOS(自動貨叉放平) FAIL OPERATION* >電磁線圈沒有電流通過
          W11: *RACK MISSET* >提升高度設定錯誤
          W12: *APPLY PARKING BRAKE* >操作者在未拉手剎時試圖離開座位
          @@FBR@@
          A1: CONTACTOR
          A2: SENSOR- CURRENT BATTERY
          B10: FUSE-TRAVEL
          B11: IGBT-U-TRAVEL
          B12: IGBT-V-TRAVEL
          B13: IGBT-W-TRAVEL
          1/3
          B14: SESOR-CURRENT-TRAVEL >U&V相
          B15: ACCELERATOR
          C20: FUSE-HYD
          C21: IGBT-U-HYD
          C22: IGBT-V-HYD
          C23: IBT-W-HYD
          C24: SENSOR-CURRENT-HYD >U&V相
          C25: SWITCH-LIFT
          C26: POTENTIO-MAST
          D30: FUSE-EPS >速度減半
          D31: SENSOR-EPS TORQUE >速度減半
          D32: TR-EPS MAIN >速度減半
          E40: TR-AOS
          E41: POTENTIO-HYD.LEVEL
          E42: ENCODER-HYD MAST
          F50: FUSE-FRONT BRAKE
          F51: POTENTIO-STEERING ANGEL >角度傳感器
          *FAIL CURRENT*
          *FAIL CURRENT-TRAVEL*
          *FAIL CURRENT-HYD*
          *FAIL VOLTAGE-TRAVEL*
          *FAIL VOLTAGE-HYD*
          *REDUCE DUTY-TRAVEL
          *REDUCE DUTY-HYD*
          *FAIL BUS SYSTEM*
          *FAIL MAIN BOARD* >IGBT門電路制動和外部5V電源電壓
          *FAIL FAIN*
          *FAIL OPERATION*
          *TURN OFF KEY SWITCH*
          *REDUCE THE LOAD*
          *REFILL HYDRAULIC OIL*
          *REFILL BRAKE OIL*
          *REPLENISH REFINED WATER FOR BATTERY*
          *CHARGER THE BATTERY*
          *RELEASE PARKING BRAKE*
          *RELEASE ACCEL TO NEUTRAL*
          *OFF HYD LEVER TO NEUTRAL*
          *AOS FAIL OPERATION* >當AOS緊急停止開關被按下時
          *RACK MISSET* >提升設備中配置了錯誤的程序
          *APPLY PARKING BRAKE* >停車后沒有使用停車制動
          @@顯示板開關RS1位置@@
          **0: MONITORING OK 正常監控,計時,預約充電,時期時間,低速設置,行駛模式,儀表,顯示,再生,
          **1: 監控符號
          2/3
          **2: 車型設置 **3: 反向制動,剎車設置 PLUGGING BRAKE **4: 低速行駛時提升速度1/2/3,提升速度1/2,傾斜速度,屬具1/2/3 **5: 顯示語言 **6: 選件設置 **7: 電壓,電流,溫度 **8: RAM和I/O數字 **9: 故障歷史1/2 **A: 電瓶電壓 **B: 轉向速度限制 **C: AOS設置1 **D: AOS設置2 **E: 記憶初始化 **F: 沒有故障顯示ROS屏幕狀態。
            附近叉車出租、租賃,維修,輪胎,鋰電池,配件;電動叉車、柴油叉車,叉車買賣,就到永新昌叉車服務平臺。